Back To Titanium Lug Bolts

Rison Titanium Exhaust Manifold Studs M8 Exhaust Manifold Stud Kit Bolts Nuts12PCS

SKU: 15424 Brands: M8 Titanium Bolts Titanium Lug Bolts Titanium Stud Bolts
5.00 out of 5 based on 1 customer rating
1 review

Material : Titanium GR5 Ti6AL4V,Ultra Light,Corrosion Resistant,

Multi Color options,Resist Fatigue,Durable

Shipping : UPS/DHL

Quantity : 12PCS per set



M8 Rison Titanium Exhaust Manifold Stud Kit Detail

Titanium Exhaust Manifold Stud Kit looks great and will allow you to properly clamp the exhaust

manifold to the cylinder head without experiencing sealing problems, stud/nut failure, or ugly

and troublesome rust and corrosion.

Titanium is 45% lighter, stronger than your stock steel bolts or studs.Moreover these Titanium

Exhaust Manifold Stud Kit is Environmental Protection,High Temperature Resistance ,Light

Weight, No Rust,Corrosion Resistance,Durable and so on .

RISON Titanium Stud Kits are made of high quality Ti 6Al-4V .We can use a hex key Allen wrench

tip to installed them easily.Titanium product is lightweight and easy to replace.Also the bolts,

nuts and spacers fit perfectly.

There are many colors and sizes for you to choose, It can effectively fix the exhaust components

under the vehicle.please confirm the size and color you need before buying.

Package includes: 12pcs titanium studs + 12pcs 12-point titanium nuts +12pcs titanium washers

Each M8 stud/washer/nut assembly weighs only 11.7g!

Buy with Confidence, Over 60,000 Titanium Fasteners in Stock, Ship within 1-2 working days.

Comparison : Made from Grade 5 6AI-4V titanium as widely used in aerospace and motorsport

Approximately 45% lighter than steel equivalents Stainless Steel, The Tensile Strength is More Than
Merit : Our Titanium exhaust manifold stud set is High Performance ,Light Weight, No Rust,
Corrosion Resistance,Durable Ideally suited to the wet and variable UK USA and Europe
climate which can cause steel studs to rapidly deteriorate.
No more studs seized in your cylinder head
No more rusted-on retaining nuts
Attractive polished finish that will not fade
Rolled threads for superior enhance fatigue resistance and protection from galling

GR5 Titanium exhaust bolt kit Size

You can choose these sizes:

  • M8x1.25x45mm
  • M8x1.25x55mm
  • M8X1.25X65MM

Multiple sizes are available ,which can avoid the thread is too short. Also which can avoid can

not pass through the flange and fall off or the bolt is too long and the seal is not tight problems

and so on .

Titanium exhaust manifold hardware kit Installation :

Clean out the receiving threads with a tap
Torque each stud and retaining nut to the manufacturer’s specification for the original item

Titanium turbo manifold stud kit Application:

Ford Diesel (6.7L Engines) ,Mitsubishi EVO/4G63 Engines,Chevrolet/GM LSX , Mazda Rx7

Designed to fit Most Volvo’s with the following engines: B21f, B21ft B23f, B23ft B230f, B30ft

Fits Honda Acura B/D/K Series, Nissan Skyline R32 R33 R34 RB20/RB25/RB30 Series Heads

most Honda/Acura DOHC B Series (B16,B18,B20), D15, D16, F20B, F20C, F22C, H22, H23 and so on.

Car racing/Car modification/Car performance improvements/Engine tuning

Exhaust system enhancements

About Us

Our company is a very professional company which is specialized in Titanium production.Our

brand is Rison Titanium.RISON-Titanium Has Been Focusing on Titanium Products for Ten Years.

Our company is not only Top manufacturer but also fully stocked supplier.We have 12 Years

manufacture and sales experience.

We are the American Titanium Industry Association Member .Also All the raw materials and

finished parts are inspected by the authoritative third-party testing institutions to ensure

quality.Moreover We always believe that customer’s satisfaction is the biggest driving

force for the company’s development.

Titanium Washers

This Exhaust Manifold Stud Kit comes with titanium washers, thick flat washers help distribute

pressure evenly.Which provide a balanced clamping load  and make it seal easier. RISON

Titanium Bolt Kit matches the original hardware required to secure the exhaust manifold

to the engine of the specified vehicle.For Honda/Acura K series engines and more

applications and so on .

Titanium header stud kit Color

You can choose these Colors:

Titanium Original/Burnt Blue/Black/Purple/Green/Golden/Rainbow

Tips : The Customs Clearance Fee Shall Be Borne By the Buyer

Be careful not to over tighten.

We can customize all titanium products (color/size and so on) ,you can contact us if you have

special requirements.

If you have any questions, please feel free to contact us. We will reply you within 24 hours.

Honda / Acura Titanium F20C/F22C Exhaust Manifold Stud Kits Titanium Intake or Exhaust Manifold Stud M10 X 1.25MM x 54MM Titanium Intake or Exhaust Manifold Stud M8 X 1.25MM x 45MM Titanium B/D/F/H/J Series Intake/Exhaust Manifold Stud Kits Honda / Acura Titanium K Series Exhaust Manifold Stud Kits Racing Toyota MR2 / Celica Titanium Exhaust Manifold Stud Kit Ford Diesel (6.0L / 6.4L Engines) Titanium Exhaust Manifold Stud Kit 1JZ/2JZ Toyota Exhaust Manifold Titanium Stud Kit Dodge SRT-4 Titanium Intake or Exhaust Manifold Stud Kit Ford Diesel (6.7L Engines) Titanium Exhaust Manifold Stud Kit Chevrolet/GM LSX Titanium Exhaust Manifold Stud Kit Titanium Exhaust Manifold Stud Kit – Mitsubishi EVO/4G63 Engines 1995+ M8 x 1.25mm x 45mm titanium studs 12-point M8 x 1.25mm titanium nuts M8 titanium washers

Overall Customer Rating

Based on 1 review 100% of customers would recommend this product to a friend (1 out of 1)

Write your review

  1. 5 out of 5

    These paired well with my new exhaust headers. Had the expected issue that when replacing the exhaust manifold gasket, one after another of the original exhaust manifold studs twisted off. After removing the portions still lodged in the cylinder head decided to find a more substantial replacement solution. After some research found this item. The studs are longer than stock, but did not interfere with the heat shield. Ultimately, the repair went better than I could have imagined and the engine is running smoother than it has for some time. Make sure you order these if you are changing your stick manifold!

    • Dear friend,
      Thank you so much for your kind review~
      We are so happy that you are satisfied with your Titanium Exhaust Manifold Stud Kit Bolts Nuts.We always believe that customer’s satisfaction is the biggest driving force for the company’s development.
      Please contact us if you have any questions,thanks and have a nice day~
      Best Regards~

Demo Features