GR2 Titanium Screws Application
GR2 titanium (commercially pure titanium) is widely used in high-performance racing models (RC cars, drones, miniature race vehicles) due to its lightweight, corrosion resistance, and durability. Below are its key advantages and applications:
1. Why Use GR2 Titanium Screws in Racing Models?
(1) Extreme Lightweight
- Density: 4.5 g/cm³ (vs. steel’s 7.8 g/cm³) → Reduces unsprung weight, improving acceleration & handling.
- Example: Replacing steel screws in an RC car can save 5-10g per wheel, enhancing cornering speed.
(2) Corrosion Resistance
- No rust or oxidation even in wet/muddy conditions (unlike steel).
- Perfect for: Off-road RC racing, drone components exposed to moisture.
(3) Good Strength for Small Fasteners
- Tensile Strength: ~345 MPa (weaker than GR5 but sufficient for small screws in low-stress areas).
- Best for: Non-load-bearing parts (body panels, trim, electronics mounts).
(4) Non-Magnetic & Non-Sparking
- Safe for electronic components (no interference with sensors/motors).
- Useful in hydrogen-powered or explosive environments (e.g., fuel system screws).
2. Common Uses in Racing Models
Application | Benefit of GR2 Titanium |
---|---|
RC Car Chassis Screws | Lighter than steel, reduces overall weight for better lap times. |
Drone Frame Fasteners | Corrosion-resistant in humid/rainy conditions. |
Miniature Motor Mounts | Non-conductive, prevents electrical shorts. |
Aero Component Attachments | High fatigue resistance for vibration-heavy areas. |
3. Comparison: GR2 vs. GR5 Titanium in Racing Models
GR2 Titanium (Pure Ti) | GR5 Titanium (Ti-6Al-4V) |
---|---|
Lower strength (345 MPa) but lighter | Higher strength (900+ MPa) but heavier |
Cheaper, good for non-critical parts | Used in high-stress areas (suspension, drivetrain) |
Easier to machine & thread | Requires anti-galling treatments |
Best Choice for Small Screws: GR2 (cost-effective & sufficiently strong for most racing model needs).
4. Limitations of GR2 Titanium Screws
- Not for high-load applications (e.g., drivetrain, suspension arms – use GR5 instead).
- Softer than steel – Can strip if over-tightened (use a torque wrench).
5. Where to Use GR2 Titanium Screws?
✅ RC Cars (body panels, servo mounts)
✅ Drones & UAVs (frame assembly, camera mounts)
✅ Miniature Racing Boats (saltwater-resistant hardware)
✅ High-Speed Model Aircraft (weight-sensitive fasteners)
Please click https://ti-alloys.com/ti-shop/?filtering=1&filter_product_brand=290 to place the order if you need our Rison Titanium GR2 small screws.
What’s more, if you need to know more about Titanium bolts nuts , pls feel free to click Here.
Rison Titanium is a very professional company ,we are specialized in the production of Titanium more than 12 years. As well as we are the American Titanium Industry Association Member. Our taitanium bar Quality Inspected Before Shipping and our company Manufacture in Strictly Accordance with ISO9001:2015& AS 9100 :2018.
If you have any questions or suggestions, pls free to contact us.